← Basin groundwater

CASTLE ROCK CR-16R

Monitored well · 152273 · Division 1 · Water District 8

Its well permit here · Well permit at DWR ↗

Source DWR administrative record · verify at DWR well record ↗ Source DWR administrative record · verify at DWR permit record ↗

Unclassified

No aquifer or designated-basin assignment — administrative world unknown, kept out of recharge math.

Water-level record

No water-level measurements are cached for this well. It is in the well inventory — permit, construction and aquifer below — but nobody has logged a level we hold.

Geophysical log

DWR holds a geophysical log for this well, run 2018-05-21 (gamma, resistivity, spontaneous_potential). DWR's log page.

Curves digitized from the scan

Hydrohistorian traced the scanned log automatically. 7 curves passed the confidence gate; 29 did not and are listed with the reason. Screening data: the scan stays the record.

CurveInterval ftCoverageVerdict Curves like this one scored
Gamma Ray (GAPI) 50–229 99% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Shallow Resistivity (Ohm-m) 50–229 80% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 17%; scale OCR confidence 0.78; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Shallow Resistivity (Ohm-m) 50–229 30% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 30%; ambiguous rows 47%
Gamma Ray (GAPI) 250–761 80% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Shallow Resistivity (Ohm-m) 250–761 93% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 73%; scale OCR confidence 0.78; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Shallow Resistivity (Ohm-m) 250–761 46% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 30%
Gamma Ray (GAPI) 198–383 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Shallow Resistivity (Ohm-m) 198–383 76% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); scale OCR confidence 0.78; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Shallow Resistivity (Ohm-m) 198–383 50% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 49%
Gamma Ray (GAPI) 398–603 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Shallow Resistivity (Ohm-m) 398–603 38% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); coverage 38%; ambiguous rows 10%; scale OCR confidence 0.78; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Shallow Resistivity (Ohm-m) 398–603 50% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 58%
Bulk Density (g/cc) 50–259 27% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 28%; ambiguous rows 39%
COMPENSATEDDENSITY (pu) 50–259 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 80%; curve name not recognized: 'COMPENSATEDDENSITY'
CORRECTION (g/cc) 50–259 98% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 56%; curve name not recognized: 'CORRECTION'
Caliper (in) 50–259 10% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 10%; ambiguous rows 25%
Gamma Ray (GAPI) 50–259 99% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINETENSION (Ib) 50–259 39% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 39%; ambiguous rows 40%; curve name not recognized: 'LINETENSION'
Bulk Density (g/cc) 300–786 24% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 24%; ambiguous rows 41%
COMPENSATEDDENSITY (pu) 300–786 85% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 86%; curve name not recognized: 'COMPENSATEDDENSITY'
CORRECTION (g/cc) 300–786 85% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 70%; curve name not recognized: 'CORRECTION'
Caliper (in) 300–786 23% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 23%; ambiguous rows 10%
Gamma Ray (GAPI) 300–786 87% not used: ambiguous rows 56%
LINETENSION (Ib) 300–786 39% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 39%; ambiguous rows 27%; curve name not recognized: 'LINETENSION'
Bulk Density (g/cc) 198–403 40% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 74%
COMPENSATEDDENSITY (pu) 198–403 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve name not recognized: 'COMPENSATEDDENSITY'
CORRECTION (g/cc) 198–403 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve name not recognized: 'CORRECTION'
Caliper (in) 198–403 63% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 52%
Gamma Ray (GAPI) 198–403 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINETENSION (Ib) 198–403 52% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 60%; curve name not recognized: 'LINETENSION'
Bulk Density (g/cc) 448–623 42% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 70%
COMPENSATEDDENSITY (pu) 448–623 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 97%; curve name not recognized: 'COMPENSATEDDENSITY'
CORRECTION (g/cc) 448–623 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve name not recognized: 'CORRECTION'
Caliper (in) 448–623 59% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 55%
Gamma Ray (GAPI) 448–623 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINETENSION (Ib) 448–623 51% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 63%; curve name not recognized: 'LINETENSION'

"Curves like this one" is the benchmark row for this curve's class: curves of the same name traced the same way, scored against DWR's own digital log of the same run. r is correlation (the print's own smoothing allowed for); error is mean absolute error as a share of the track's printed range; "below r 0.8" is the share of passing curves in the class that still disagreed with DWR's log, which this curve's own numbers cannot rule out.

The LAS files and every verdict are in the statewide groundwater release (/data, table gw_digitized); the MCP server's gw_digitized_curves and gw_net_sand work from them. How well the tracer does was measured against DWR's own digital logs.

The well itself

Total depth662.0 ft
Perforated interval410.0–640.0 ft
Ground elevation6340.0 ft
Permit81329
Location39.35000, -104.86000
What this page is not

Monitoring records are irregular: measurements cluster where somebody chose to look, so a trend describes this well's record, not the aquifer as a whole. Levels are DWR's published measurements, unedited. A trend here is not a prediction, and it is not a determination about anyone's water right.