Hydrohistorian
WOODMOOR 21
Monitored well · 152308 · Division 1 · Water District 8
Its well permit here · Well permit at DWR ↗
Source DWR administrative record · verify at DWR well record ↗ Source DWR administrative record · verify at DWR permit record ↗
Unclassified
No aquifer or designated-basin assignment — administrative world unknown, kept out of recharge math.
Water-level record
No water-level measurements are cached for this well. It is in the well inventory — permit, construction and aquifer below — but nobody has logged a level we hold.
Geophysical log
DWR holds a geophysical log for this well, run 2018-09-13 (gamma, resistivity, spontaneous_potential). DWR's log page.
Formation picks (DWR)
| Aquifer | Top ft | Base ft | Net sand ft |
|---|---|---|---|
| DENVER | 1208 | 1670 | |
| ARAPAHOE | 1700 | 2300 | |
| DAWSON | 1196 | 575 |
Net sand is DWR's own reading of the log (its gLogThickness), not the gross interval.
Net sand per aquifer, from the gamma curve
Computed here from DWR's own digital log (LAS): linear gamma index, clean/shale lines at p10/p90 of the gamma over the interval, sand where Vsh < 0.4, beds under 1.0 ft merged. DWR’s own pick is beside it, never averaged with it.
| Aquifer | Interval ft | Net sand ft | Net / gross | DWR net sand ft | Difference ft |
|---|---|---|---|---|---|
| DENVER | 1208–1670 | 219 | 0.47 | ||
| ARAPAHOE | 1700–2300 | 326 | 0.54 |
A gamma cutoff is a convention, not a measurement. Against DWR’s own picks on 50 wells this one correlates at r 0.86 with a median error near 30% and no bias (how it was scored).
Curves digitized from the scan
Hydrohistorian traced the scanned log automatically. 12 curves passed the confidence gate; 143 did not and are listed with the reason. Screening data: the scan stays the record.
| Curve | Interval ft | Coverage | Verdict | Curves like this one scored | |
|---|---|---|---|---|---|
| Bulk Density (g/cc) | 40–259 | 9% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 9%; ambiguous rows 20% | ||
| COMPENSATEDDENSITY (pu) | 40–259 | 96% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 69%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 40–259 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 30%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 40–259 | 20% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 20% | ||
| Gamma Ray (GAPI) | 40–259 | 99% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| LINE TENSION (Ib) | 40–259 | 28% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 29%; ambiguous rows 7%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 300–809 | 29% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 29%; ambiguous rows 23% | ||
| COMPENSATEDDENSITY (pu) | 300–809 | 97% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 77%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 300–809 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 34%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 300–809 | 21% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 21% | ||
| Gamma Ray (GAPI) | 300–809 | 99% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| LINE TENSION (Ib) | 300–809 | 50% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 19%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 850–1359 | 35% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 35%; ambiguous rows 24% | ||
| COMPENSATEDDENSITY (pu) | 850–1359 | 98% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 80%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 850–1359 | 98% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 38%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 850–1359 | 17% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 18%; ambiguous rows 8% | ||
| Gamma Ray (GAPI) | 850–1359 | 99% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| LINE TENSION (Ib) | 850–1359 | 52% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 22%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 1400–1909 | 35% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 35%; ambiguous rows 19% | ||
| COMPENSATEDDENSITY (pu) | 1400–1909 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 84%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 1400–1909 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 32%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 1400–1909 | 15% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 16% | ||
| Gamma Ray (GAPI) | 1400–1909 | 99% | not used: ambiguous rows 60% | ||
| LINE TENSION (Ib) | 1400–1909 | 53% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 16%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 1950–2439 | 11% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 12%; ambiguous rows 13% | ||
| COMPENSATEDDENSITY (pu) | 1950–2439 | 83% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 78%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 1950–2439 | 82% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 22%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 1950–2439 | 11% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 12%; ambiguous rows 10% | ||
| Gamma Ray (GAPI) | 1950–2439 | 84% | not used: ambiguous rows 52% | ||
| LINE TENSION (Ib) | 1950–2439 | 26% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 26%; ambiguous rows 11%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 198–405 | 53% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 38% | ||
| COMPENSATEDDENSITY (pu) | 198–405 | 97% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 43%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 198–405 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 7%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 198–405 | 32% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 32% | ||
| Gamma Ray (GAPI) | 198–405 | 100% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| LINE TENSION (Ib) | 198–405 | 76% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 17%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 448–625 | 53% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 34% | ||
| COMPENSATEDDENSITY (pu) | 448–625 | 96% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 41%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 448–625 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 448–625 | 35% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 35% | ||
| Gamma Ray (GAPI) | 448–625 | 100% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| LINE TENSION (Ib) | 448–625 | 76% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 16%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 648–845 | 56% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 24% | ||
| COMPENSATEDDENSITY (pu) | 648–845 | 98% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 51%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 648–845 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 17%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 648–845 | 33% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 34% | ||
| Gamma Ray (GAPI) | 648–845 | 100% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| LINE TENSION (Ib) | 648–845 | 76% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 14%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 848–1065 | 59% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 22% | ||
| COMPENSATEDDENSITY (pu) | 848–1065 | 97% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 58%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 848–1065 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 17%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 848–1065 | 16% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 16% | ||
| Gamma Ray (GAPI) | 848–1065 | 100% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| LINE TENSION (Ib) | 848–1065 | 77% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 13%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 1098–1285 | 66% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 17% | ||
| COMPENSATEDDENSITY (pu) | 1098–1285 | 98% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 57%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 1098–1285 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 22%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 1098–1285 | 37% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 38% | ||
| Gamma Ray (GAPI) | 1098–1285 | 100% | not used: ambiguous rows 53% | ||
| LINE TENSION (Ib) | 1098–1285 | 82% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 11%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 1298–1505 | 66% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 12% | ||
| COMPENSATEDDENSITY (pu) | 1298–1505 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 71%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 1298–1505 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 45%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 1298–1505 | 37% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 38% | ||
| Gamma Ray (GAPI) | 1298–1505 | 100% | not used: ambiguous rows 55% | ||
| LINE TENSION (Ib) | 1298–1505 | 84% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 7%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 1548–1725 | 62% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 22% | ||
| COMPENSATEDDENSITY (pu) | 1548–1725 | 98% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 67%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 1548–1725 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 23%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 1548–1725 | 28% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 29% | ||
| Gamma Ray (GAPI) | 1548–1725 | 100% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| LINE TENSION (Ib) | 1548–1725 | 79% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 11%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 1748–1946 | 58% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 22% | ||
| COMPENSATEDDENSITY (pu) | 1748–1946 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 54%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 1748–1946 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 8%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 1748–1946 | 18% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 19% | ||
| Gamma Ray (GAPI) | 1748–1946 | 100% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| LINE TENSION (Ib) | 1748–1946 | 83% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 12%; curve name not recognized: 'LINE TENSION' | ||
| Bulk Density (g/cc) | 1948–2165 | 56% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 30% | ||
| COMPENSATEDDENSITY (pu) | 1948–2165 | 97% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 45%; scale OCR confidence 0.78; curve name not recognized: 'COMPENSATEDDENSITY' | ||
| CORRECTION (g/cc) | 1948–2165 | 97% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 1948–2165 | 22% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 22% | ||
| Gamma Ray (GAPI) | 1948–2165 | 100% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| LINE TENSION (Ib) | 1948–2165 | 81% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 14%; curve name not recognized: 'LINE TENSION' | ||
| Conductivity (mmho/m) | 50–229 | 88% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 35%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 50–229 | 99% | not used: scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 50–229 | 98% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 36%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 50–229 | 25% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 25%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 250–779 | 91% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 38%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 250–779 | 99% | not used: ambiguous rows 52%; scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 250–779 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 33%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 250–779 | 44% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 800–1329 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 64%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 800–1329 | 99% | not used: scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 800–1329 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 50%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 800–1329 | 43% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 1350–1879 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 84%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 1350–1879 | 99% | not used: ambiguous rows 57%; scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 1350–1879 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 59%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 1350–1879 | 42% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 1900–2414 | 89% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 82%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 1900–2414 | 83% | not used: ambiguous rows 58%; scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 1900–2414 | 92% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 64%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 1900–2414 | 24% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 24%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 198–373 | 93% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 45%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 198–373 | 100% | not used: scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 198–373 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 32%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 198–373 | 67% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 398–593 | 91% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 33%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 398–593 | 100% | not used: scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 398–593 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 20%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 398–593 | 67% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 598–813 | 93% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 36%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 598–813 | 100% | not used: scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 598–813 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 25%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 598–813 | 69% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 848–1033 | 96% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 51%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 848–1033 | 100% | not used: scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 848–1033 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 43%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 848–1033 | 65% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 1048–1253 | 93% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 48%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 1048–1253 | 100% | not used: scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 1048–1253 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 35%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 1048–1253 | 66% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 1298–1474 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 48%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 1298–1474 | 100% | not used: scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 1298–1474 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 36%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 1298–1474 | 64% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 1498–1693 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 58%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 1498–1693 | 100% | not used: scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 1498–1693 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 43%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 1498–1693 | 68% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 1698–1913 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 76%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 1698–1913 | 100% | not used: scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 1698–1913 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 47%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 1698–1913 | 64% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 1948–2133 | 94% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 36%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 1948–2133 | 100% | not used: scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 1948–2133 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 37%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 1948–2133 | 69% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | 2148–2329 | 98% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 76%; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Gamma Ray (GAPI) | 2148–2329 | 97% | not used: scale OCR confidence 0.55 | ||
| Shallow Resistivity (Ohm-m) | 2148–2329 | 97% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 56%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 2148–2329 | 66% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Conductivity (mmho/m) | -6–9034 | 89% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 53%; scale OCR confidence 0.63; curve class not verified by the benchmark: Conductivity traced as solid | ||
| Deep Resistivity ((Ohm-m)) | -6–9034 | 83% | not used: ambiguous rows 42%; curve class not verified by the benchmark: Deep Resistivity traced as thin | ||
| Gamma Ray (GAPI) | -6–9034 | 89% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| Shallow Resistivity (Ohm-m) | -6–9034 | 89% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 44%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Shallow Resistivity (Ohm-m) | -6–9034 | 9% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 10%; ambiguous rows 24%; scale OCR confidence 0.56 | ||
| Spontaneous Potential (mV) | -6–9034 | 11% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 12%; ambiguous rows 24%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| Bulk Density (g/cc) | 39–8955 | 88% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 60%; scale OCR confidence 0.58; curve class not verified by the benchmark: Bulk Density traced as solid | ||
| CORRECTION (g/cc) | 39–8955 | 89% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 58%; curve name not recognized: 'CORRECTION' | ||
| Caliper (in) | 39–8955 | 10% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 10%; ambiguous rows 30% | ||
| Gamma Ray (GAPI) | 39–8955 | 90% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| LINE TENSION (Ib) | 39–8955 | 13% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 13%; ambiguous rows 44%; curve name not recognized: 'LINE TENSION' |
"Curves like this one" is the benchmark row for this curve's class: curves of the same name traced the same way, scored against DWR's own digital log of the same run. r is correlation (the print's own smoothing allowed for); error is mean absolute error as a share of the track's printed range; "below r 0.8" is the share of passing curves in the class that still disagreed with DWR's log, which this curve's own numbers cannot rule out.
The LAS files and every verdict are in the statewide groundwater release
(/data, table gw_digitized); the MCP server's gw_digitized_curves and
gw_net_sand work from them. How well the tracer does was
measured against DWR's own digital logs.
The well itself
| Total depth | 2330.0 ft |
|---|---|
| Ground elevation | 7400.0 ft |
| Permit | 81657 |
| Location | 39.12000, -104.86000 |
What this page is not
Monitoring records are irregular: measurements cluster where somebody chose to look, so a trend describes this well's record, not the aquifer as a whole. Levels are DWR's published measurements, unedited. A trend here is not a prediction, and it is not a determination about anyone's water right.