← Basin groundwater

WINGFOOT WWR-3

Monitored well · 152893 · Division 1 · Water District 1

Its well permit here · Well permit at DWR ↗

Source DWR administrative record · verify at DWR well record ↗ Source DWR administrative record · verify at DWR permit record ↗

Unclassified

No aquifer or designated-basin assignment — administrative world unknown, kept out of recharge math.

Water-level record

No water-level measurements are cached for this well. It is in the well inventory — permit, construction and aquifer below — but nobody has logged a level we hold.

Geophysical log

DWR holds a geophysical log for this well, run 2019-03-27 (gamma, resistivity, caliper, porosity). DWR's log page.

Formation picks (DWR)

AquiferTop ftBase ftNet sand ft
UPPER LARAMIE150 1150
WHITE RIVER 150

Net sand is DWR's own reading of the log (its gLogThickness), not the gross interval.

Net sand per aquifer, from the gamma curve

Computed here from DWR's own digital log (LAS): linear gamma index, clean/shale lines at p10/p90 of the gamma over the interval, sand where Vsh < 0.4, beds under 1.0 ft merged. DWR’s own pick is beside it, never averaged with it.

AquiferInterval ftNet sand ftNet / grossDWR net sand ftDifference ft
UPPER LARAMIE150–1150 546 0.55

A gamma cutoff is a convention, not a measurement. Against DWR’s own picks on 50 wells this one correlates at r 0.86 with a median error near 30% and no bias (how it was scored).

Curves digitized from the scan

Hydrohistorian traced the scanned log automatically. 17 curves passed the confidence gate; 71 did not and are listed with the reason. Screening data: the scan stays the record.

CurveInterval ftCoverageVerdict Curves like this one scored
Conductivity (mmho/m) -7–1456 17% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 18%; ambiguous rows 9%
Conductivity (mmho/m) -7–1456 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; ambiguous rows 36%
Deep Resistivity (Ohm-m) -7–1456 1% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; ambiguous rows 38%
Deep Resistivity (Ohm-m) -7–1456 2% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 2%; ambiguous rows 31%; scale OCR confidence 0.57
Gamma Ray (GAPI) -7–1456 87% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Gamma Ray (GAPI) -7–1456 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 0%; ambiguous rows 7%
Shallow Resistivity (Ohm-m) -7–1456 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; ambiguous rows 47%; scale OCR confidence 0.66
Shallow Resistivity (Ohm-m) -7–1456 86% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) -7–1456 1% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; ambiguous rows 22%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Spontaneous Potential (mV) -7–1456 23% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 24%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
BIT SIZE (in) -5–1461 1% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; ambiguous rows 30%; curve name not recognized: 'BIT SIZE'
BIT SIZE (in) -5–1461 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 0%; curve name not recognized: 'BIT SIZE'
CNLS (pu) -5–1461 11% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 12%; ambiguous rows 14%; curve name not recognized: 'CNLS'
CNLS (pu) -5–1461 88% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 84%; curve name not recognized: 'CNLS'
DPOR (pu) -5–1461 2% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 2%; ambiguous rows 25%; curve name not recognized: 'DPOR'
DPOR (pu) -5–1461 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; ambiguous rows 36%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) -5–1461 87% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Gamma Ray (GAPI) -5–1461 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 0%
LINE TENSION (Ib) -5–1461 1% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; ambiguous rows 47%; curve name not recognized: 'LINE TENSION'
LINE TENSION (Ib) -5–1461 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 0%; ambiguous rows 40%; curve name not recognized: 'LINE TENSION'
RHOC (g/cc) -5–1461 22% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 23%; curve name not recognized: 'RHOC'
RHOC (g/cc) -5–1461 84% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 63%; curve name not recognized: 'RHOC'
dcal (in) -5–1461 22% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 22%; curve name not recognized: 'dcal'
dcal (in) -5–1461 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; ambiguous rows 6%; curve name not recognized: 'dcal'
Deep Resistivity (Ohm-m) -10–319 88% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 97%; curve class not verified by the benchmark: Deep Resistivity traced as solid
Gamma Ray (GAPI) -10–319 97% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Deep Resistivity (Ohm-m) 350–869 98% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 100%; curve class not verified by the benchmark: Deep Resistivity traced as solid
Gamma Ray (GAPI) 350–869 98% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Deep Resistivity (Ohm-m) 900–1420 64% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 96%; curve class not verified by the benchmark: Deep Resistivity traced as solid
Gamma Ray (GAPI) 900–1420 80% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Deep Resistivity (Ohm-m) 48–251 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 100%; curve class not verified by the benchmark: Deep Resistivity traced as solid
Gamma Ray (GAPI) 48–251 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Deep Resistivity (Ohm-m) 298–471 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve class not verified by the benchmark: Deep Resistivity traced as solid
Gamma Ray (GAPI) 298–471 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Deep Resistivity (Ohm-m) 498–691 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 100%; curve class not verified by the benchmark: Deep Resistivity traced as solid
Gamma Ray (GAPI) 498–691 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Deep Resistivity (Ohm-m) 698–911 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 91%; curve class not verified by the benchmark: Deep Resistivity traced as solid
Gamma Ray (GAPI) 698–911 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Deep Resistivity (Ohm-m) 948–1131 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 84%; curve class not verified by the benchmark: Deep Resistivity traced as solid
Gamma Ray (GAPI) 948–1131 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
BIT SIZE (in) -6–309 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 0%; ambiguous rows 75%; curve name not recognized: 'BIT SIZE'
DPOR (pu) -6–309 98% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 86%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) -6–309 98% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) -6–309 16% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 16%; curve name not recognized: 'LINE TENSION'
RHOC (g/cc) -6–309 90% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 24%; curve name not recognized: 'RHOC'
dcal (in) -6–309 11% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 12%; curve name not recognized: 'dcal'
BIT SIZE (in) 350–859 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; curve name not recognized: 'BIT SIZE'
DPOR (pu) 350–859 98% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 87%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 350–859 98% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 350–859 27% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 27%; curve name not recognized: 'LINE TENSION'
RHOC (g/cc) 350–859 91% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 35%; curve name not recognized: 'RHOC'
dcal (in) 350–859 17% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 18%; curve name not recognized: 'dcal'
BIT SIZE (in) 900–1409 4% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 4%; ambiguous rows 62%; curve name not recognized: 'BIT SIZE'
DPOR (pu) 900–1409 75% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 83%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 900–1409 76% not used: ambiguous rows 58%
LINE TENSION (Ib) 900–1409 21% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 22%; ambiguous rows 6%; curve name not recognized: 'LINE TENSION'
RHOC (g/cc) 900–1409 73% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 60%; curve name not recognized: 'RHOC'
dcal (in) 900–1409 17% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 18%; ambiguous rows 8%; curve name not recognized: 'dcal'
BIT SIZE (in) 48–237 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; ambiguous rows 62%; curve name not recognized: 'BIT SIZE'
DPOR (pu) 48–237 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 75%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 48–237 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 48–237 21% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 22%; curve name not recognized: 'LINE TENSION'
RHOC (g/cc) 48–237 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 16%; curve name not recognized: 'RHOC'
dcal (in) 48–237 20% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 20%; curve name not recognized: 'dcal'
BIT SIZE (in) 248–457 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 0%; curve name not recognized: 'BIT SIZE'
DPOR (pu) 248–457 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 70%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 248–457 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 248–457 57% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); curve name not recognized: 'LINE TENSION'
RHOC (g/cc) 248–457 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); curve name not recognized: 'RHOC'
dcal (in) 248–457 23% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 24%; curve name not recognized: 'dcal'
BIT SIZE (in) 498–677 1% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; curve name not recognized: 'BIT SIZE'
DPOR (pu) 498–677 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 66%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 498–677 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 498–677 49% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); curve name not recognized: 'LINE TENSION'
RHOC (g/cc) 498–677 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 22%; curve name not recognized: 'RHOC'
dcal (in) 498–677 21% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 22%; curve name not recognized: 'dcal'
BIT SIZE (in) 698–897 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; curve name not recognized: 'BIT SIZE'
DPOR (pu) 698–897 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 55%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 698–897 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 698–897 47% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); curve name not recognized: 'LINE TENSION'
RHOC (g/cc) 698–897 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 17%; curve name not recognized: 'RHOC'
dcal (in) 698–897 16% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 16%; curve name not recognized: 'dcal'
BIT SIZE (in) 900–1117 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; curve name not recognized: 'BIT SIZE'
DPOR (pu) 900–1117 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 64%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 900–1117 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 900–1117 54% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); curve name not recognized: 'LINE TENSION'
RHOC (g/cc) 900–1117 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 39%; curve name not recognized: 'RHOC'
dcal (in) 900–1117 16% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 17%; curve name not recognized: 'dcal'

"Curves like this one" is the benchmark row for this curve's class: curves of the same name traced the same way, scored against DWR's own digital log of the same run. r is correlation (the print's own smoothing allowed for); error is mean absolute error as a share of the track's printed range; "below r 0.8" is the share of passing curves in the class that still disagreed with DWR's log, which this curve's own numbers cannot rule out.

The LAS files and every verdict are in the statewide groundwater release (/data, table gw_digitized); the MCP server's gw_digitized_curves and gw_net_sand work from them. How well the tracer does was measured against DWR's own digital logs.

The well itself

Total depth1180.0 ft
Ground elevation5940.0 ft
Permit82927
Location40.96000, -104.87000
What this page is not

Monitoring records are irregular: measurements cluster where somebody chose to look, so a trend describes this well's record, not the aquifer as a whole. Levels are DWR's published measurements, unedited. A trend here is not a prediction, and it is not a determination about anyone's water right.