← Basin groundwater

TRIVIEW METRO DIST A-9

Monitored well · 153078 · Division 2 · Water District 10

Its well permit here · Well permit at DWR ↗

Source DWR administrative record · verify at DWR well record ↗ Source DWR administrative record · verify at DWR permit record ↗

Unclassified

No aquifer or designated-basin assignment — administrative world unknown, kept out of recharge math.

Water-level record

No water-level measurements are cached for this well. It is in the well inventory — permit, construction and aquifer below — but nobody has logged a level we hold.

Geophysical log

DWR holds a geophysical log for this well, run 2020-02-27 (gamma, resistivity, spontaneous_potential). DWR's log page.

Formation picks (DWR)

AquiferTop ftBase ftNet sand ft
ARAPAHOE1367
DENVER 1314

Net sand is DWR's own reading of the log (its gLogThickness), not the gross interval.

Curves digitized from the scan

Hydrohistorian traced the scanned log automatically. 22 curves passed the confidence gate; 158 did not and are listed with the reason. Screening data: the scan stays the record.

CurveInterval ftCoverageVerdict Curves like this one scored
CNPOR (pu) 40–259 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 89%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 40–259 93% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 31%; curve name not recognized: 'CORRECTION'
DCAL (in) 40–259 10% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 10%; curve name not recognized: 'DCAL'
DPOR (pu) 40–259 11% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 12%; ambiguous rows 6%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 40–259 98% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 40–259 30% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 31%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 300–809 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 89%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 300–809 96% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 36%; curve name not recognized: 'CORRECTION'
DCAL (in) 300–809 13% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 13%; ambiguous rows 10%; curve name not recognized: 'DCAL'
DPOR (pu) 300–809 27% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 28%; ambiguous rows 16%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 300–809 99% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 300–809 47% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 11%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 850–1359 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 93%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 850–1359 96% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 37%; curve name not recognized: 'CORRECTION'
DCAL (in) 850–1359 11% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 12%; ambiguous rows 6%; curve name not recognized: 'DCAL'
DPOR (pu) 850–1359 22% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 22%; ambiguous rows 16%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 850–1359 99% not used: ambiguous rows 51%
LINE TENSION (Ib) 850–1359 39% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 39%; ambiguous rows 13%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 1400–1909 97% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 89%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 1400–1909 97% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 53%; curve name not recognized: 'CORRECTION'
DCAL (in) 1400–1909 21% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 21%; curve name not recognized: 'DCAL'
DPOR (pu) 1400–1909 20% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 20%; ambiguous rows 18%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 1400–1909 96% not used: ambiguous rows 68%
LINE TENSION (Ib) 1400–1909 37% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 38%; ambiguous rows 12%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 148–350 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 70%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 148–350 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 13%; curve name not recognized: 'CORRECTION'
DCAL (in) 148–350 23% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 24%; ambiguous rows 10%; curve name not recognized: 'DCAL'
DPOR (pu) 148–350 53% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 27%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 148–350 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 148–350 73% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 15%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 398–570 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 67%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 398–570 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 10%; curve name not recognized: 'CORRECTION'
DCAL (in) 398–570 25% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 25%; ambiguous rows 6%; curve name not recognized: 'DCAL'
DPOR (pu) 398–570 50% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 23%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 398–570 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 398–570 73% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 15%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 598–789 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 70%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 598–789 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); curve name not recognized: 'CORRECTION'
DCAL (in) 598–789 19% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 20%; ambiguous rows 8%; curve name not recognized: 'DCAL'
DPOR (pu) 598–789 45% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 23%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 598–789 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 598–789 71% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 15%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 798–1010 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 75%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 798–1010 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 9%; curve name not recognized: 'CORRECTION'
DCAL (in) 798–1010 22% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 23%; ambiguous rows 6%; curve name not recognized: 'DCAL'
DPOR (pu) 798–1010 54% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 25%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 798–1010 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 798–1010 71% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 16%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 1048–1229 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 72%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 1048–1229 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); curve name not recognized: 'CORRECTION'
DCAL (in) 1048–1229 20% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 20%; ambiguous rows 11%; curve name not recognized: 'DCAL'
DPOR (pu) 1048–1229 44% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 26%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 1048–1229 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 1048–1229 68% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 17%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 1248–1450 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 68%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 1248–1450 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); curve name not recognized: 'CORRECTION'
DCAL (in) 1248–1450 31% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 31%; ambiguous rows 8%; curve name not recognized: 'DCAL'
DPOR (pu) 1248–1450 52% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 28%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 1248–1450 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 1248–1450 69% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 18%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 1498–1669 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 68%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 1498–1669 98% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 21%; curve name not recognized: 'CORRECTION'
DCAL (in) 1498–1669 18% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 18%; ambiguous rows 10%; curve name not recognized: 'DCAL'
DPOR (pu) 1498–1669 46% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 29%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 1498–1669 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 1498–1669 72% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 16%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 1698–1889 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 57%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 1698–1889 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 11%; curve name not recognized: 'CORRECTION'
DCAL (in) 1698–1889 27% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 27%; curve name not recognized: 'DCAL'
DPOR (pu) 1698–1889 40% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 31%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 1698–1889 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 1698–1889 65% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 18%; curve name not recognized: 'LINE TENSION'
Deep Resistivity (Ohm-m) -3–1970 22% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 23%; ambiguous rows 43%
Line Tension (Ib) (RLL3(Ohm-m)) -3–1970 18% not used: coverage 19%; curve name not recognized: 'Line Tension (Ib)'
Shallow Resistivity (Ohm-m) -3–1970 14% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 14%; ambiguous rows 59%
Spontaneous Potential (mV) -3–1970 98% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 51%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Spontaneous Potential (mV) -3–1970 25% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 25%; ambiguous rows 25%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
CORRECTION (g/cc) 10–7066 91% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 50%; curve name not recognized: 'CORRECTION'
DCAL (in) 10–7066 11% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 11%; ambiguous rows 23%; curve name not recognized: 'DCAL'
Gamma Ray (GAPI) 10–7066 91% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 10–7066 91% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 80%; curve name not recognized: 'LINE TENSION'
Conductivity (mmho/m) -2–151 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 87%; curve class not verified by the benchmark: Conductivity traced as solid
Spontaneous Potential (mV) -2–151 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 55%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 198–371 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 80%; curve class not verified by the benchmark: Conductivity traced as solid
Spontaneous Potential (mV) 198–371 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 34%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 398–591 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 86%; curve class not verified by the benchmark: Conductivity traced as solid
Spontaneous Potential (mV) 398–591 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 58%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 598–811 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve class not verified by the benchmark: Conductivity traced as solid
Spontaneous Potential (mV) 598–811 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 74%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 848–1031 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve class not verified by the benchmark: Conductivity traced as solid
Spontaneous Potential (mV) 848–1031 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 81%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1048–1251 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 95%; curve class not verified by the benchmark: Conductivity traced as solid
Spontaneous Potential (mV) 1048–1251 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 79%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1298–1471 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 96%; curve class not verified by the benchmark: Conductivity traced as solid
Spontaneous Potential (mV) 1298–1471 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 65%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1498–1691 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve class not verified by the benchmark: Conductivity traced as solid
Spontaneous Potential (mV) 1498–1691 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 40%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1698–1911 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 91%; curve class not verified by the benchmark: Conductivity traced as solid
Spontaneous Potential (mV) 1698–1911 98% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 41%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Deep Resistivity (Ohm-m) -3–1970 22% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 23%; ambiguous rows 43%
Line Tension (Ib) (RLL3(Ohm-m)) -3–1970 18% not used: coverage 19%; curve name not recognized: 'Line Tension (Ib)'
Shallow Resistivity (Ohm-m) -3–1970 14% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 14%; ambiguous rows 59%
Spontaneous Potential (mV) -3–1970 98% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 51%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Spontaneous Potential (mV) -3–1970 25% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 25%; ambiguous rows 25%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
CORRECTION (g/cc) 10–7066 91% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 50%; curve name not recognized: 'CORRECTION'
DCAL (in) 10–7066 11% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 11%; ambiguous rows 23%; curve name not recognized: 'DCAL'
Gamma Ray (GAPI) 10–7066 91% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 10–7066 91% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 80%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 40–259 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 89%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 40–259 93% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 31%; curve name not recognized: 'CORRECTION'
DCAL (in) 40–259 10% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 10%; curve name not recognized: 'DCAL'
DPOR (pu) 40–259 11% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 12%; ambiguous rows 6%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 40–259 98% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 40–259 30% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 31%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 300–809 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 89%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 300–809 96% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 36%; curve name not recognized: 'CORRECTION'
DCAL (in) 300–809 13% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 13%; ambiguous rows 10%; curve name not recognized: 'DCAL'
DPOR (pu) 300–809 27% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 28%; ambiguous rows 16%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 300–809 99% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 300–809 47% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 11%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 850–1359 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 93%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 850–1359 96% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 37%; curve name not recognized: 'CORRECTION'
DCAL (in) 850–1359 11% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 12%; ambiguous rows 6%; curve name not recognized: 'DCAL'
DPOR (pu) 850–1359 22% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 22%; ambiguous rows 16%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 850–1359 99% not used: ambiguous rows 51%
LINE TENSION (Ib) 850–1359 39% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 39%; ambiguous rows 13%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 1400–1909 97% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 89%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 1400–1909 97% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 53%; curve name not recognized: 'CORRECTION'
DCAL (in) 1400–1909 21% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 21%; curve name not recognized: 'DCAL'
DPOR (pu) 1400–1909 20% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 20%; ambiguous rows 18%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 1400–1909 96% not used: ambiguous rows 68%
LINE TENSION (Ib) 1400–1909 37% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 38%; ambiguous rows 12%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 148–350 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 70%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 148–350 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 13%; curve name not recognized: 'CORRECTION'
DCAL (in) 148–350 23% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 24%; ambiguous rows 10%; curve name not recognized: 'DCAL'
DPOR (pu) 148–350 53% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 27%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 148–350 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 148–350 73% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 15%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 398–570 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 67%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 398–570 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 10%; curve name not recognized: 'CORRECTION'
DCAL (in) 398–570 25% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 25%; ambiguous rows 6%; curve name not recognized: 'DCAL'
DPOR (pu) 398–570 50% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 23%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 398–570 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 398–570 73% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 15%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 598–789 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 70%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 598–789 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); curve name not recognized: 'CORRECTION'
DCAL (in) 598–789 19% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 20%; ambiguous rows 8%; curve name not recognized: 'DCAL'
DPOR (pu) 598–789 45% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 23%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 598–789 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 598–789 71% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 15%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 798–1010 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 75%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 798–1010 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 9%; curve name not recognized: 'CORRECTION'
DCAL (in) 798–1010 22% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 23%; ambiguous rows 6%; curve name not recognized: 'DCAL'
DPOR (pu) 798–1010 54% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 25%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 798–1010 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 798–1010 71% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 16%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 1048–1229 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 72%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 1048–1229 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); curve name not recognized: 'CORRECTION'
DCAL (in) 1048–1229 20% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 20%; ambiguous rows 11%; curve name not recognized: 'DCAL'
DPOR (pu) 1048–1229 44% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 26%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 1048–1229 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 1048–1229 68% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 17%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 1248–1450 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 68%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 1248–1450 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); curve name not recognized: 'CORRECTION'
DCAL (in) 1248–1450 31% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 31%; ambiguous rows 8%; curve name not recognized: 'DCAL'
DPOR (pu) 1248–1450 52% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 28%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 1248–1450 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 1248–1450 69% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 18%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 1498–1669 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 68%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 1498–1669 98% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 21%; curve name not recognized: 'CORRECTION'
DCAL (in) 1498–1669 18% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 18%; ambiguous rows 10%; curve name not recognized: 'DCAL'
DPOR (pu) 1498–1669 46% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 29%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 1498–1669 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 1498–1669 72% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 16%; curve name not recognized: 'LINE TENSION'
CNPOR (pu) 1698–1889 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 57%; curve name not recognized: 'CNPOR'
CORRECTION (g/cc) 1698–1889 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 11%; curve name not recognized: 'CORRECTION'
DCAL (in) 1698–1889 27% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 27%; curve name not recognized: 'DCAL'
DPOR (pu) 1698–1889 40% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 31%; curve name not recognized: 'DPOR'
Gamma Ray (GAPI) 1698–1889 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
LINE TENSION (Ib) 1698–1889 65% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 18%; curve name not recognized: 'LINE TENSION'

"Curves like this one" is the benchmark row for this curve's class: curves of the same name traced the same way, scored against DWR's own digital log of the same run. r is correlation (the print's own smoothing allowed for); error is mean absolute error as a share of the track's printed range; "below r 0.8" is the share of passing curves in the class that still disagreed with DWR's log, which this curve's own numbers cannot rule out.

The LAS files and every verdict are in the statewide groundwater release (/data, table gw_digitized); the MCP server's gw_digitized_curves and gw_net_sand work from them. How well the tracer does was measured against DWR's own digital logs.

The well itself

Total depth1910.0 ft
Perforated interval1470.0–1510.0 ft
Ground elevation7280.0 ft
Permit84006
Location39.07000, -104.82000
What this page is not

Monitoring records are irregular: measurements cluster where somebody chose to look, so a trend describes this well's record, not the aquifer as a whole. Levels are DWR's published measurements, unedited. A trend here is not a prediction, and it is not a determination about anyone's water right.