← Basin groundwater

KEYES

Monitored well · 157531 · Division 2 · Water District 10

Its well permit here · Well permit at DWR ↗

Source DWR administrative record · verify at DWR well record ↗ Source DWR administrative record · verify at DWR permit record ↗

Unclassified

No aquifer or designated-basin assignment — administrative world unknown, kept out of recharge math.

Water-level record

No water-level measurements are cached for this well. It is in the well inventory — permit, construction and aquifer below — but nobody has logged a level we hold.

Geophysical log

DWR holds a geophysical log for this well, run 2024-10-30 (gamma, resistivity, spontaneous_potential). DWR's log page.

Curves digitized from the scan

Hydrohistorian traced the scanned log automatically. 1 curve passed the confidence gate; 7 did not and are listed with the reason. Screening data: the scan stays the record.

CurveInterval ftCoverageVerdict Curves like this one scored
OHMM (OHMM) 4–169 80% not used: ambiguous rows 98%; curve name not recognized: 'OHMM'
OHMM (OHMM) 180–389 100% not used: ambiguous rows 100%; curve name not recognized: 'OHMM'
OHMM (OHMM) 400–525 95% not used: ambiguous rows 93%; curve name not recognized: 'OHMM'
16" Normal Resistivity (OHMM) 10–525 89% pass r 0.96 median, error 1.2% of scale, 0% below r 0.8 (n 6) LAS
64" Normal Resistivity (OHMM) 10–525 89% not used: ambiguous rows 9%
Natural Gamma (CPS) 10–525 90% not used: ambiguous rows 5%; curve class not verified by the benchmark: Natural Gamma traced as thin
Single-Point Resistance (OHM) 10–525 9% not used: coverage 9%; ambiguous rows 30%
Spontaneous Potential (mV) 10–525 90% not used: ambiguous rows 20%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)

"Curves like this one" is the benchmark row for this curve's class: curves of the same name traced the same way, scored against DWR's own digital log of the same run. r is correlation (the print's own smoothing allowed for); error is mean absolute error as a share of the track's printed range; "below r 0.8" is the share of passing curves in the class that still disagreed with DWR's log, which this curve's own numbers cannot rule out.

The LAS files and every verdict are in the statewide groundwater release (/data, table gw_digitized); the MCP server's gw_digitized_curves and gw_net_sand work from them. How well the tracer does was measured against DWR's own digital logs.

The well itself

Total depth500.0 ft
Perforated interval160.0–500.0 ft
Ground elevation6741.0 ft
Permit89475
Location39.03000, -104.44000
What this page is not

Monitoring records are irregular: measurements cluster where somebody chose to look, so a trend describes this well's record, not the aquifer as a whole. Levels are DWR's published measurements, unedited. A trend here is not a prediction, and it is not a determination about anyone's water right.