Hydrohistorian
BUCKLEY SFB
Monitored well · 157840 · Division 1 · Water District 2
Its well permit here · Well permit at DWR ↗
Source DWR administrative record · verify at DWR well record ↗ Source DWR administrative record · verify at DWR permit record ↗
Unclassified
No aquifer or designated-basin assignment — administrative world unknown, kept out of recharge math.
Water-level record
No water-level measurements are cached for this well. It is in the well inventory — permit, construction and aquifer below — but nobody has logged a level we hold.
Geophysical log
DWR holds a geophysical log for this well, run 2026-01-23 (gamma, resistivity, spontaneous_potential). DWR's log page.
Formation picks (DWR)
| Aquifer | Top ft | Base ft | Net sand ft |
|---|---|---|---|
| UPPER ARAPAHOE | 840 | 1000 | |
| LOWER ARAPAHOE | 1135 | 1426 | |
| DENVER | 748 |
Net sand is DWR's own reading of the log (its gLogThickness), not the gross interval.
Net sand per aquifer, from the gamma curve
Computed here from DWR's own digital log (LAS): linear gamma index, clean/shale lines at p10/p90 of the gamma over the interval, sand where Vsh < 0.4, beds under 1.0 ft merged. DWR’s own pick is beside it, never averaged with it.
| Aquifer | Interval ft | Net sand ft | Net / gross | DWR net sand ft | Difference ft |
|---|---|---|---|---|---|
| UPPER ARAPAHOE | 840–1000 | 46 | 0.29 | ||
| LOWER ARAPAHOE | 1135–1426 | 98 | 0.34 |
A gamma cutoff is a convention, not a measurement. Against DWR’s own picks on 50 wells this one correlates at r 0.86 with a median error near 30% and no bias (how it was scored).
Curves digitized from the scan
Hydrohistorian traced the scanned log automatically. 3 curves passed the confidence gate; 78 did not and are listed with the reason. Screening data: the scan stays the record.
| Curve | Interval ft | Coverage | Verdict | Curves like this one scored | |
|---|---|---|---|---|---|
| BOREID (in) | -4–169 | 4% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 5%; ambiguous rows 22%; curve name not recognized: 'BOREID' | ||
| Conductivity (mmho/m) | -4–169 | 6% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 7%; ambiguous rows 30% | ||
| DCAL (in) | -4–169 | 11% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 12%; ambiguous rows 8%; curve name not recognized: 'DCAL' | ||
| Deep Resistivity (Ohm-m) | -4–169 | 4% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 5%; ambiguous rows 42% | ||
| Gamma Ray (GAPI) | -4–169 | 98% | not used: ambiguous rows 64% | ||
| Line Tension (Ib) | -4–169 | 26% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 26%; ambiguous rows 7%; curve name not recognized: 'Line Tension' | ||
| Shallow Resistivity (Ohm-m) | -4–169 | 96% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 96%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | -4–169 | 38% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 39%; ambiguous rows 8%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| BOREID (in) | 200–719 | 3% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 3%; ambiguous rows 16%; curve name not recognized: 'BOREID' | ||
| Conductivity (mmho/m) | 200–719 | 28% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 29%; ambiguous rows 21% | ||
| DCAL (in) | 200–719 | 9% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 9%; ambiguous rows 10%; curve name not recognized: 'DCAL' | ||
| Deep Resistivity (Ohm-m) | 200–719 | 19% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 20%; ambiguous rows 17% | ||
| Gamma Ray (GAPI) | 200–719 | 99% | not used: ambiguous rows 62% | ||
| Line Tension (Ib) | 200–719 | 45% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 15%; curve name not recognized: 'Line Tension' | ||
| Shallow Resistivity (Ohm-m) | 200–719 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 100%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 200–719 | 38% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 38%; ambiguous rows 8%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| BOREID (in) | 750–1269 | 2% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 3%; ambiguous rows 17%; curve name not recognized: 'BOREID' | ||
| Conductivity (mmho/m) | 750–1269 | 27% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 28%; ambiguous rows 28% | ||
| DCAL (in) | 750–1269 | 9% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 10%; ambiguous rows 10%; curve name not recognized: 'DCAL' | ||
| Deep Resistivity (Ohm-m) | 750–1269 | 20% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 21%; ambiguous rows 26% | ||
| Gamma Ray (GAPI) | 750–1269 | 99% | not used: ambiguous rows 58% | ||
| Line Tension (Ib) | 750–1269 | 46% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 19%; curve name not recognized: 'Line Tension' | ||
| Shallow Resistivity (Ohm-m) | 750–1269 | 99% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 750–1269 | 43% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 7%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| BOREID (in) | 98–269 | 4% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 5%; ambiguous rows 10%; curve name not recognized: 'BOREID' | ||
| Conductivity (mmho/m) | 98–269 | 47% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 49% | ||
| DCAL (in) | 98–269 | 21% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 22%; curve name not recognized: 'DCAL' | ||
| Deep Resistivity (Ohm-m) | 98–269 | 35% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 36%; ambiguous rows 42% | ||
| Gamma Ray (GAPI) | 98–269 | 100% | not used: ambiguous rows 54% | ||
| Line Tension (Ib) | 98–269 | 66% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 27%; curve name not recognized: 'Line Tension' | ||
| Shallow Resistivity (Ohm-m) | 98–269 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 98–269 | 68% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 9%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| BOREID (in) | 298–489 | 7% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 8%; ambiguous rows 8%; curve name not recognized: 'BOREID' | ||
| Conductivity (mmho/m) | 298–489 | 63% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 30% | ||
| DCAL (in) | 298–489 | 21% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 21%; curve name not recognized: 'DCAL' | ||
| Deep Resistivity (Ohm-m) | 298–489 | 48% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 28% | ||
| Gamma Ray (GAPI) | 298–489 | 100% | not used: ambiguous rows 56% | ||
| Line Tension (Ib) | 298–489 | 78% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 18%; curve name not recognized: 'Line Tension' | ||
| Shallow Resistivity (Ohm-m) | 298–489 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 298–489 | 62% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 11%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| BOREID (in) | 498–710 | 4% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 4%; ambiguous rows 18%; curve name not recognized: 'BOREID' | ||
| Conductivity (mmho/m) | 498–710 | 51% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 37% | ||
| DCAL (in) | 498–710 | 22% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 22%; ambiguous rows 8%; curve name not recognized: 'DCAL' | ||
| Deep Resistivity (Ohm-m) | 498–710 | 37% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 37%; ambiguous rows 38% | ||
| Gamma Ray (GAPI) | 498–710 | 100% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| Line Tension (Ib) | 498–710 | 76% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 22%; curve name not recognized: 'Line Tension' | ||
| Shallow Resistivity (Ohm-m) | 498–710 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 498–710 | 68% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 8%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| BOREID (in) | 748–930 | 1% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 2%; ambiguous rows 22%; curve name not recognized: 'BOREID' | ||
| Conductivity (mmho/m) | 748–930 | 55% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 46% | ||
| DCAL (in) | 748–930 | 24% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 24%; curve name not recognized: 'DCAL' | ||
| Deep Resistivity (Ohm-m) | 748–930 | 43% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 42% | ||
| Gamma Ray (GAPI) | 748–930 | 100% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| Line Tension (Ib) | 748–930 | 74% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 25%; curve name not recognized: 'Line Tension' | ||
| Shallow Resistivity (Ohm-m) | 748–930 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 748–930 | 67% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 11%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| BOREID (in) | 948–1150 | 7% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 7%; ambiguous rows 7%; curve name not recognized: 'BOREID' | ||
| Conductivity (mmho/m) | 948–1150 | 52% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 33% | ||
| DCAL (in) | 948–1150 | 23% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 23%; curve name not recognized: 'DCAL' | ||
| Deep Resistivity (Ohm-m) | 948–1150 | 38% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 38%; ambiguous rows 25% | ||
| Gamma Ray (GAPI) | 948–1150 | 100% | not used: ambiguous rows 57% | ||
| Line Tension (Ib) | 948–1150 | 76% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 23%; curve name not recognized: 'Line Tension' | ||
| Shallow Resistivity (Ohm-m) | 948–1150 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 100%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 948–1150 | 67% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 14%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| BOREID (in) | 1198–1370 | 3% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 3%; ambiguous rows 20%; curve name not recognized: 'BOREID' | ||
| Conductivity (mmho/m) | 1198–1370 | 56% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 26% | ||
| DCAL (in) | 1198–1370 | 19% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 20%; curve name not recognized: 'DCAL' | ||
| Deep Resistivity (Ohm-m) | 1198–1370 | 41% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 20% | ||
| Gamma Ray (GAPI) | 1198–1370 | 100% | pass | r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) | LAS |
| Line Tension (Ib) | 1198–1370 | 73% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 22%; curve name not recognized: 'Line Tension' | ||
| Shallow Resistivity (Ohm-m) | 1198–1370 | 100% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 96%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | 1198–1370 | 62% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 10%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| BOREID (in) | -4–5938 | 10% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 10%; ambiguous rows 50%; curve name not recognized: 'BOREID' | ||
| CASEOD | -4–5938 | 48% | not used: ambiguous rows 22%; curve name not recognized: 'CASEOD' | ||
| Conductivity (mmho/m) | -4–5938 | 10% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 11%; ambiguous rows 32%; scale OCR confidence 0.76 | ||
| DCAL (in) | -4–5938 | 6% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 6%; ambiguous rows 58%; curve name not recognized: 'DCAL' | ||
| LineTension (Ib) | -4–5938 | 5% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 6%; ambiguous rows 52%; scale OCR confidence 0.79; curve name not recognized: 'LineTension' | ||
| MATRXDEN (No) | -4–5938 | 73% | not used: ambiguous rows 21%; curve name not recognized: 'MATRXDEN' | ||
| Shallow Resistivity (Ohm-m) | -4–5938 | 86% | not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve class not verified by the benchmark: Shallow Resistivity traced as solid | ||
| Spontaneous Potential (mV) | -4–5938 | 10% | not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 10%; ambiguous rows 31%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal) | ||
| g/cc | -4–5938 | 26% | not used: coverage 27%; ambiguous rows 27%; curve name not recognized: 'g/cc' |
"Curves like this one" is the benchmark row for this curve's class: curves of the same name traced the same way, scored against DWR's own digital log of the same run. r is correlation (the print's own smoothing allowed for); error is mean absolute error as a share of the track's printed range; "below r 0.8" is the share of passing curves in the class that still disagreed with DWR's log, which this curve's own numbers cannot rule out.
The LAS files and every verdict are in the statewide groundwater release
(/data, table gw_digitized); the MCP server's gw_digitized_curves and
gw_net_sand work from them. How well the tracer does was
measured against DWR's own digital logs.
The well itself
| Total depth | 1440.0 ft |
|---|---|
| Ground elevation | 5539.0 ft |
| Permit | 90128 |
| Location | 39.72000, -104.77000 |
What this page is not
Monitoring records are irregular: measurements cluster where somebody chose to look, so a trend describes this well's record, not the aquifer as a whole. Levels are DWR's published measurements, unedited. A trend here is not a prediction, and it is not a determination about anyone's water right.