← Basin groundwater

P760 LAND LLC

Monitored well · 157873 · Division 2 · Water District 10

Its well permit here · Well permit at DWR ↗

Source DWR administrative record · verify at DWR well record ↗ Source DWR administrative record · verify at DWR permit record ↗

Unclassified

No aquifer or designated-basin assignment — administrative world unknown, kept out of recharge math.

Water-level record

No water-level measurements are cached for this well. It is in the well inventory — permit, construction and aquifer below — but nobody has logged a level we hold.

Geophysical log

DWR holds a geophysical log for this well, run 2026-06-18 (gamma, resistivity, spontaneous_potential). DWR's log page.

Formation picks (DWR)

AquiferTop ftBase ftNet sand ft
ARAPAHOE595 1075
LARAMIE-FOX HILLS1270 1615
DENVER 525

Net sand is DWR's own reading of the log (its gLogThickness), not the gross interval.

Net sand per aquifer, from the gamma curve

Computed here from gamma digitized from the scan (gate pass, coverage 100%): linear gamma index, clean/shale lines at p10/p90 of the gamma over the interval, sand where Vsh < 0.4, beds under 1.0 ft merged. DWR’s own pick is beside it, never averaged with it.

AquiferInterval ftNet sand ftNet / grossDWR net sand ftDifference ft
ARAPAHOE595–1075 too few samples or flat gamma
LARAMIE-FOX HILLS1270–1615 too few samples or flat gamma

A gamma cutoff is a convention, not a measurement. Against DWR’s own picks on 50 wells this one correlates at r 0.86 with a median error near 30% and no bias (how it was scored). This well’s gamma was digitized from a scan: two conventions stacked, so read the beds, not the total.

Curves digitized from the scan

Hydrohistorian traced the scanned log automatically. 19 curves passed the confidence gate; 172 did not and are listed with the reason. Screening data: the scan stays the record.

CurveInterval ftCoverageVerdict Curves like this one scored
Conductivity (mmho/m) -4–159 22% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 23%; ambiguous rows 22%
Gamma Ray (GAPI) -4–159 99% not used: ambiguous rows 51%
Line Tension (Ib) -4–159 37% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 38%; ambiguous rows 19%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) -4–159 25% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 25%; ambiguous rows 26%
Shallow Resistivity (Ohm-m) -4–159 98% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 87%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) -4–159 36% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 37%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 200–709 13% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 13%; ambiguous rows 31%
Gamma Ray (GAPI) 200–709 99% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 200–709 32% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 32%; ambiguous rows 23%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 200–709 18% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 19%; ambiguous rows 36%
Shallow Resistivity (Ohm-m) 200–709 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 100%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 200–709 42% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 750–1259 12% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 13%; ambiguous rows 44%
Gamma Ray (GAPI) 750–1259 99% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 750–1259 29% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 29%; ambiguous rows 28%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 750–1259 17% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 17%; ambiguous rows 41%
Shallow Resistivity (Ohm-m) 750–1259 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 96%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 750–1259 40% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1300–1783 5% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 6%; ambiguous rows 41%
Gamma Ray (GAPI) 1300–1783 82% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 1300–1783 17% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 17%; ambiguous rows 19%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 1300–1783 9% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 9%; ambiguous rows 28%
Shallow Resistivity (Ohm-m) 1300–1783 84% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 1300–1783 21% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 21%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 198–401 42% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 40%
Gamma Ray (GAPI) 198–401 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 198–401 75% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 28%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 198–401 60% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 34%
Shallow Resistivity (Ohm-m) 198–401 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 198–401 58% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 448–621 32% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 32%; ambiguous rows 58%
Gamma Ray (GAPI) 448–621 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 448–621 61% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 48%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 448–621 48% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 51%
Shallow Resistivity (Ohm-m) 448–621 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 100%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 448–621 63% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 648–841 41% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 43%
Gamma Ray (GAPI) 648–841 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 648–841 70% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 34%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 648–841 56% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 37%
Shallow Resistivity (Ohm-m) 648–841 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 94%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 648–841 61% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 848–1062 36% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 37%; ambiguous rows 53%
Gamma Ray (GAPI) 848–1062 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 848–1062 63% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 44%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 848–1062 50% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 46%
Shallow Resistivity (Ohm-m) 848–1062 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 91%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 848–1062 63% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1098–1281 40% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 51%
Gamma Ray (GAPI) 1098–1281 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 1098–1281 69% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 40%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 1098–1281 55% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 40%
Shallow Resistivity (Ohm-m) 1098–1281 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 1098–1281 66% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1298–1501 33% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 34%; ambiguous rows 13%
Gamma Ray (GAPI) 1298–1501 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 1298–1501 70% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 24%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 1298–1501 52% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 27%
Shallow Resistivity (Ohm-m) 1298–1501 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 1298–1501 69% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 200–700 14% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 15%; ambiguous rows 34%
Gamma Ray (GAPI) 200–700 99% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 200–700 41% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 17%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 200–700 21% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 21%; ambiguous rows 36%
Shallow Resistivity (Ohm-m) 200–700 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 200–700 43% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 750–1250 12% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 13%; ambiguous rows 44%
Gamma Ray (GAPI) 750–1250 99% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 750–1250 40% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 19%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 750–1250 19% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 19%; ambiguous rows 42%
Shallow Resistivity (Ohm-m) 750–1250 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 750–1250 41% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1300–1796 5% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 6%; ambiguous rows 21%
Gamma Ray (GAPI) 1300–1796 80% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 1300–1796 21% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 22%; ambiguous rows 10%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 1300–1796 7% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 8%; ambiguous rows 18%
Shallow Resistivity (Ohm-m) 1300–1796 86% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 96%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 1300–1796 20% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 20%; ambiguous rows 6%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 198–397 2% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 2%; ambiguous rows 15%
Gamma Ray (GAPI) 198–397 100% not used: ambiguous rows 81%
Line Tension (Ib) 198–397 56% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 198–397 9% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 9%; ambiguous rows 6%
Shallow Resistivity (Ohm-m) 198–397 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 70%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 198–397 59% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 400–617 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; ambiguous rows 67%
Gamma Ray (GAPI) 400–617 100% not used: ambiguous rows 80%
Line Tension (Ib) 400–617 51% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 400–617 5% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 5%; ambiguous rows 10%
Shallow Resistivity (Ohm-m) 400–617 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 79%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 400–617 63% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 648–837 1% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 2%; ambiguous rows 31%
Gamma Ray (GAPI) 648–837 100% not used: ambiguous rows 75%
Line Tension (Ib) 648–837 56% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 648–837 8% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 9%; ambiguous rows 10%
Shallow Resistivity (Ohm-m) 648–837 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 56%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 648–837 61% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 848–1057 1% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; ambiguous rows 33%
Gamma Ray (GAPI) 848–1057 100% not used: ambiguous rows 79%
Line Tension (Ib) 848–1057 50% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 848–1057 4% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 4%; ambiguous rows 23%
Shallow Resistivity (Ohm-m) 848–1057 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 56%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 848–1057 64% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1098–1277 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 1%; ambiguous rows 100%
Gamma Ray (GAPI) 1098–1277 100% not used: ambiguous rows 82%
Line Tension (Ib) 1098–1277 52% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 7%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 1098–1277 9% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 10%
Shallow Resistivity (Ohm-m) 1098–1277 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 74%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 1098–1277 67% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1298–1497 0% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 0%; ambiguous rows 100%
Gamma Ray (GAPI) 1298–1497 100% not used: ambiguous rows 79%
Line Tension (Ib) 1298–1497 49% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 1298–1497 5% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 6%; ambiguous rows 6%
Shallow Resistivity (Ohm-m) 1298–1497 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 53%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 1298–1497 69% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1500–1715 3% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 3%; ambiguous rows 34%
Gamma Ray (GAPI) 1500–1715 83% not used: ambiguous rows 71%
Line Tension (Ib) 1500–1715 40% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 10%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 1500–1715 8% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 8%; ambiguous rows 34%
Shallow Resistivity (Ohm-m) 1500–1715 83% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 58%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 1500–1715 55% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 7%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 200–719 10% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 10%; ambiguous rows 14%
Gamma Ray (GAPI) 200–719 99% not used: ambiguous rows 55%
Line Tension (Ib) 200–719 27% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 28%; ambiguous rows 27%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 200–719 18% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 19%; ambiguous rows 23%
Shallow Resistivity (Ohm-m) 200–719 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 100%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 200–719 47% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 8%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 750–1269 7% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 8%; ambiguous rows 19%
Gamma Ray (GAPI) 750–1269 99% not used: ambiguous rows 54%
Line Tension (Ib) 750–1269 32% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 33%; ambiguous rows 22%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 750–1269 19% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 19%; ambiguous rows 16%
Shallow Resistivity (Ohm-m) 750–1269 99% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 100%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 750–1269 47% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 7%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1300–1820 8% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 9%; ambiguous rows 16%
Gamma Ray (GAPI) 1300–1820 82% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 1300–1820 18% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 18%; ambiguous rows 17%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 1300–1820 12% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 13%; ambiguous rows 15%
Shallow Resistivity (Ohm-m) 1300–1820 77% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 94%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 1300–1820 32% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 32%; ambiguous rows 12%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 198–415 36% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 37%; ambiguous rows 15%
Gamma Ray (GAPI) 198–415 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 198–415 71% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 23%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 198–415 53% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 24%
Shallow Resistivity (Ohm-m) 198–415 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 198–415 53% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 8%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 448–635 27% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 28%; ambiguous rows 11%
Gamma Ray (GAPI) 448–635 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 448–635 66% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 26%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 448–635 42% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 25%
Shallow Resistivity (Ohm-m) 448–635 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 448–635 56% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 6%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 648–855 18% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 18%; ambiguous rows 10%
Gamma Ray (GAPI) 648–855 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 648–855 67% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 18%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 648–855 42% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 11%
Shallow Resistivity (Ohm-m) 648–855 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 648–855 56% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 7%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 898–1075 33% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 33%; ambiguous rows 8%
Gamma Ray (GAPI) 898–1075 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 898–1075 72% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 18%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 898–1075 50% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 20%
Shallow Resistivity (Ohm-m) 898–1075 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 898–1075 56% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 8%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1098–1295 34% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 35%; ambiguous rows 6%
Gamma Ray (GAPI) 1098–1295 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 1098–1295 80% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 11%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 1098–1295 55% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 7%
Shallow Resistivity (Ohm-m) 1098–1295 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 99%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 1098–1295 57% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Conductivity (mmho/m) 1298–1515 46% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 26%
Gamma Ray (GAPI) 1298–1515 100% pass r 0.99 median, error 0.6% of scale, 7% below r 0.8 (n 411) LAS
Line Tension (Ib) 1298–1515 77% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 20%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) 1298–1515 61% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 30%
Shallow Resistivity (Ohm-m) 1298–1515 100% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve class not verified by the benchmark: Shallow Resistivity traced as solid
Spontaneous Potential (mV) 1298–1515 40% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); ambiguous rows 8%; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
Deep Resistivity (Ohm-m) -4–6940 85% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 98%; curve class not verified by the benchmark: Deep Resistivity traced as solid
DeepResistivity(Ohm-m) (Conductivity(mmho/m)) -4–6940 76% not used: ambiguous rows 44%; curve name not recognized: 'DeepResistivity(Ohm-m)'
Gamma Ray (GAPI) -4–6940 85% not used: ambiguous rows 68%
Line Tension (Ib) -4–6940 11% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 12%; ambiguous rows 35%; curve name not recognized: 'Line Tension'
Medium Resistivity (Ohm-m) -4–6940 6% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 6%; ambiguous rows 51%
SNDERRM -4–6940 60% not used: ambiguous rows 19%; curve name not recognized: 'SNDERRM'
SPSHIFT -4–6940 11% not used: coverage 12%; ambiguous rows 52%; curve name not recognized: 'SPSHIFT'
Spontaneous Potential (mV) -4–6940 9% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 9%; ambiguous rows 52%; scale OCR confidence 0.73; SP: the printed scale is a span with an unknown offset, and the benchmark could not verify the shape (median r 0.28 after offset removal)
degF -4–6940 47% not used: ambiguous rows 22%; curve name not recognized: 'degF'
g/cc -4–6940 22% not used: coverage 22%; ambiguous rows 35%; curve name not recognized: 'g/cc'
CNPOR (pu) -3–2006 89% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 97%; curve name not recognized: 'CNPOR'
Gamma Ray (GAPI) -3–2006 16% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 16%; ambiguous rows 55%
LCAL (in) -3–2006 89% not used: solid curve on a Phoenix/Pioneer print: only the gamma is verified (its resistivity scales are log/backup scales the parser does not read, benchmark r < 0.5); ambiguous rows 69%; curve name not recognized: 'LCAL'
LCAL (in) -3–2006 10% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 11%; ambiguous rows 77%; curve name not recognized: 'LCAL'
PE 10-0.25 LCORN (g/cc) -3–2006 20% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 20%; ambiguous rows 28%; curve name not recognized: 'PE 10-0.25 LCORN'
PE 10-0.25 LCORN (g/cc) -3–2006 6% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 7%; ambiguous rows 62%; curve name not recognized: 'PE 10-0.25 LCORN'
PORL (pu) -3–2006 9% not used: dashed curve on a Phoenix/Pioneer print: not traceable (benchmark median r 0.38 for the shallow resistivity, 0.00 before the dash/dot split); coverage 9%; ambiguous rows 52%; scale OCR confidence 0.78; curve name not recognized: 'PORL'

"Curves like this one" is the benchmark row for this curve's class: curves of the same name traced the same way, scored against DWR's own digital log of the same run. r is correlation (the print's own smoothing allowed for); error is mean absolute error as a share of the track's printed range; "below r 0.8" is the share of passing curves in the class that still disagreed with DWR's log, which this curve's own numbers cannot rule out.

The LAS files and every verdict are in the statewide groundwater release (/data, table gw_digitized); the MCP server's gw_digitized_curves and gw_net_sand work from them. How well the tracer does was measured against DWR's own digital logs.

The well itself

Total depth1655.0 ft
Ground elevation6510.0 ft
Permit90330
Location38.91000, -104.49000
What this page is not

Monitoring records are irregular: measurements cluster where somebody chose to look, so a trend describes this well's record, not the aquifer as a whole. Levels are DWR's published measurements, unedited. A trend here is not a prediction, and it is not a determination about anyone's water right.